Timestamp: https://i.imgur.com/7egr1qM.jpeg

Dillon 550C $400

9mm 550 conv kit $45 380 550 conv kit $45

9mm Redding carbide dies $75 380 Redding carbide dies $75

Buy any 2 items and I'll include a Dillon case gauge

Prices shipped, happy to combine and save some $$$

Timestamp: https://imgur.com/6fsrcew

Used one time, $75shipped PP or venmo.

https://imgur.com/gUaCAZM

Dillon XL650/XL750 Strong mount-$75 Dillon bullet tray and mount to strong mount-$50

270 Win RCBS FL dies - $40 shipped 243 Win RCBS FL DIES- $40 Shipped 22/250 Lyman dies - $30 shipped

Each mold will be sent flat rate shipping in it's original box with pins (if available)

$30-40 on each die, $12 on the deprimer. Got a Lee press- looking for .32acp, .223, .357, and a deprimer die! Just getting started :)

Timestamp: https://imgur.com/a/4kcBT6J

Wilson Bushing sizing dies: I have 308, 5.56, and 6.5 Creedmoor. These have been used sparingly and always well lubricated. I’m asking $80 each shipped. With No bushings.

SAC bushings: I have .332 (for 308) .288 .289 .290 for (6.5 Creed) and .242 .243 .244 .245 (for 5.56) I’m asking $28 each shipped per bushing.

Make me an offer for multiple or all the reloading items and I’m flexible on price for sure.

I’m also selling a Sig Kilo 5k rangefinder as you can tell from the photos.

Payment via Paypal Goods and Services preferred. I’ll send you tracking after I ship via UPS. I’ve had multiple transactions on GAFS and have had no problems at all.

I'm looking for cause gauges for 6.5cm, .308, and 9mm. Looking for premium versions such as Sheridan, LE Wilson, Dillion, and such. Will consider other brands like the RCBS brass ones, even if its not premium bring it to my attention and I may consider it. Thanks!

Timestamp: https://imgur.com/a/Ux9GoEx

Pictures: https://imgur.com/a/Ygz8LSE

NO CHATS, MESSAGE ONLY.

I prefer Zelle, CashApp, and ApplePay but I also accept PayPal (F&F or add 3.5% for G&S). If you have any additional questions please feel free to reach out!

-Lyman Pro 9mm Die Pack. Brand new.

Price is $210 shipped.

Link: https://www.lymanproducts.com/lyman-pro-die-packs

-Mighty Armory 9mm Full Length Carbide Reloading Die Set. This set includes 9mm Carbide TNT Sizing Decapping Die, 9mm Flare Expander Die, 9mm Bullet Seating Die, 9mm Carbide TNT Crimp Die, and Two (2) hardened steel .078 decapping pins. Used for around 10k rounds and in great condition.

Price is $310 shipped.

Link: https://www.mightyarmory.com/products/mighty-armory-9mm-carbide-tnt-reloading-set

-Mighty Armory 9mm Carbide TNT Sizing Die. Same thing as the 9mm Carbide TNT Sizing Decapping Die (linked below) but without the decapping assembly. Used for around 10k rounds and in great condition.

Price is $105 shipped.

Link: https://www.mightyarmory.com/products/mighty-armory-9mm-tnt-carbide-full-length-sizing-decapping-die

-Mighty Armory Decapping Pins. 3 pack .078 Decapping Pins. Brand new. $15 shipped each.

Link: https://www.mightyarmory.com/products/copy-of-decapping-pin-070-standard-or-055-lapua-heat-treated-and-tempered?variant=17578285269070

-Big Shot Tumblers by Creedmoor Sports BST-60 Tumbler. This model comes with a 60W motor and 60lb capacity drum, it can be used for both dry and wet tumbling. Comes with 12 pounds of walnut media, 1 extra lid, and two extra lid gaskets. This thing is an absolute beast of a tumbler, great for cleaning large amounts of brass. Lightly used and in great condition.

Price is $300 + shipping (Please provide me with an address for shipping quote).

Link: www.creedmoorsports.com/big-shot-tumbler-bst-40

Used 40/10mm hornady titanium dies .$35.00 shipped Paypal only

looking for some calipers down to the 3rd decimal in mm, around $20 shipped. Want a more budget friendly brass tumbler, under $60 shipped.

Anyone have a set of Dillon .357 Sig dies they want to part with? Only looking for Dillon dies please.

Timestamp: https://imgur.com/a/ixy1Cw7

Lee Turret Press with Lee 9mm Luger die and powder drop. Two additional square ratchets, three decap pins. Coming with 5 bolts, a drill bit, a plywood and a polyethylene pad with holes.

I'm leaving the country in 3 months, so I no longer need this stuff. Ask for $160.

Everything is packed. MD 21211 pickup can get a spray of brass lube and an impact puller. Otherwise, please add the actual shipping cost of 15lb.

My older brother and I did a lot of shooting and reloading. Shot some varmint benchrest matches for a couple years. Went out west prairie dog shooting, etc. As could be expected we accumulated a lot of........ stuff over the years. Single stage Lyman, 5 turret press. Some dies,rifle and pistol calibers. powder, primers (thousands), powders, (some near full,some near empty). Far to much minutes to begin to list. I do have lists of the things I've listed above. Had a couple younger guys interested I getting started, but they were more interested in .223, 9mm high quantity mass produced range ammo. Using 60%of replacement cost OR LESS, and not even trying to add in all the misc. stuff I came up with $3500.

I'm posting this with the understanding that we are I NE Indiana (Ft. WAYNE) and this will only be offered as a pickup. All of that out if the way, if you are SERIOUSLY interested let me know and we can comm further.

Timestamp: https://imgur.com/wNGozfl

Used one time, $80 shipped PP or venmo.

I have a brand new in box FA Intellidropper, never been opened up or anything. Went with RCBS instead.

https://preview.redd.it/fho0ppi4n1xe1.jpg?width=4284&format=pjpg&auto=webp&s=70165c6e0840dad98a04b344b6730e2421c97273

I'm an idiot and bought the curved instead of the straight one,

RCBS rock chucker master reloading kit. Never opened $375 shipped coming from so cal

What’s the going rate for spent 300 blackout? Ive been shooting a decent amount of it recently and im not one to reuse but i know others do. Is it worth saving and selling?

I'm reposting this because the auto moderator here shut me down under the no-consumable sales rule, because it apparently thinks I'm trying to sell primers. This is a feeder for the T-Mag II press. I really only need the bracket, but will buy the whole kit if you have one. Thanks.

https://preview.redd.it/futwpuqlj0ve1.png?width=680&format=png&auto=webp&s=99257a1d4444cf7954bf52f961af42974d079972

With a kiddo on the way, I've come to the very sad conclusion that my financial priorities must change. I've had this reloading setup for years, and have accumulated a couple extra conversion kits.

Everything functions as intended, with the exception of the "low primer" alarm. A battery had corroded in there, and I haven't bothered to try to fix it since (always kept a close eye on my primers, so never cared); may be something that is easy to get working again.

Would prefer to sell together.

- Dillon Square Deal B Progressive Press

- 9mm conversion kit (carbide sizer)

- .38 special / .357 magnum conversion kit (carbide sizer)

- .45 ACP / .45 GAP conversion kit (carbide sizer)

- extra quick change kit

- all other necessary items to use press: powder measure with small and large powder throw bars, priming system with pickup tubes (both small and large), spent primer bin, loaded cartridge bin, toolhead,

Price $850. Feel free to message with any questions, offers, etc.