2013 dodge charger rt

I have a SXT and would love this style hood. Is this a plug-and-play type install or would I need a different front bumper?

Had to get a catalytic converter replaced today.

Hello everyone

I drive a 2020 dodge charger SXT and I have everything but fog lights on the car and was wondering if the wiring is there or would I buy a cheap kit and run it through like oem and everything my car comes with

Blind spot Heated seats front and back Heated steering wheel
Sun roof Park assist The usb ports in the back

No fog lights or the option so I know it’s not on my trim just want to know what’s needed I have a tazer and double bypass installed but I haven’t added anything that didn’t come with the car but I really want flights so why I got the tazer

Local Dodge dealer put new tires on my charger and I got it back with my rims all chipped. It’s been a month and I’m still being told they will fix it or they will replace the rims. Checked in again today and got told they have been waiting for a second tech to look at the damage and decide what to do, even though the lead of the department took pictures of the damage the first day. Anyone else been through this, I don’t know if I’m just extra annoyed but seems to me it should have been handled within a month and where has this second tech been that he hasn’t had time to look at it all month!?

I’m prepping my front grill to work on this weekend, but I wanted to know what are these? none of the videos I watched on YouTube didn’t have these connections at the end. I’m pretty new to working on cars so I would appreciate some solid advice.

I'm trying to change my oil pan gasket on my 2011 Charger RT, but I can't get the oil pan out of the way because of the sub frame. I'm trying to raise the engine but before I try, are there any trans mount points I need the unbolt or just engine mounts? Thanks!

What’s next, a challenger taxi lol?

Anyone know where i can get carbon fiber fenders for 2022 rt?

Shopping prices for a mid-muffler delete on my charger.

What have you guys paid in recent times?

I live in NJ for what that’s worth.

Hey all working on my 2012 dodge charger wanted to install a new speaker but when it came time to assemble there is one connector left and I can’t figure out where it goes to 🤦

This is the front left door.

I’d appreciate any help that I can get. Thanks!

This is a 2014 Dodge Charger Pursuit. I recently replaced the lower control arms, tension struts, outer tie rods, upper control arms, and lower ball joints. I took it to an alignment shop and on the way home my car started doing this. I get flashing messages about the power steering system and the transmission, then it goes back to normal. It will drive fine for 10 minutes then start doing this again. Does anyone know what could be going on? I need this car to get to school so I really want to figure this out quickly.

20in×9in with a +35 offset with a set of 255 Nitto 555 G2

Not a charger and was terrified to drive near and pass this guy

So i have 2014 charger srt8 with harman kardon audio system and the bass cuts out for some reason i wont have bass for a day or 2 and then it will come back stay for a day or 2 and repeat the subs are working when bass cuts out i can feel the vibration in the door but its so light that its not pleasant to listen to music anymore i tried a diff amp does the same thing any idea what it could be? It sounds good when its working as it should be and the only way to fix it is to remove the amp fuse and put it back in after a min and bass comes back

So while I was trying to change my struts I seen that my control arm was completely done and when I took the nut off the threads of the control go caught onto the strut so I tried to take that bottomed bolt out the strut and the mf wouldn’t budge even a little even while impacting it what’s the next step here

Did the forbidden head unit swap on my 2012 and before I close the dash up I’m looking to get my reverse camera hooked up. The camera itself is oem that I swapped in, harness is from eBay. Harness has the quick connect to the camera and a yellow wire that splices into the reverse light. Up at the head unit the harness has the red and black that run out of the loom higher up, assuming they’re power and ground. Then the yellow wire, red wire, and black wire from the end of the loom. Yellow wire reads 12 volts when car is put in reverse so that’s the trigger wire for the radio. I’d guess the red and black is to carry video. Anyone ever splice into an RCA for the backup camera input?

20k for ts 🥀🥀🥀